Hazards | PPE Required | Tools/Material | Additional Requirements (if any) |
|---|---|---|---|
Harmful Fumes Harmful Fluids | Gloves Eye Protection Respirators | Ventilation if required Manufacturers Specification | |
Training Requirements | WHMIS |
Safe Work Practices
Supervisors / Foremen:
- Ensure materials, equipment and manpower are in place to comply with these safe work practices and job procedure.
- Address all safety concerns that may arise while using the equipment inside.
- Ensure all required permits are in place.
Employees:
- Follow all safe work practices and job procedure.
- Wear proper respiratory protection equipment when required.
- Report any incidents, accidents or near misses to supervisor.
Do:
- Wear respiratory protective masks.
- Make sure ventilation rates of building working in is high
- Check that HVAC Systems and fans are in place and properly running
- Open windows and doors wherever possible while running equipment
Do Not:
- Idle or run equipment for a long period of time
- Stay away as far as reasonable possible from equipment exhaust while in use.
*Important Note: Mike's Electric workers are exposed for a short period of time only
Safe Job Procedure
- Shut off equipment whenever possible to avoid excessive exhaust emissions
- Stay away from exhaust fan while engine is running.
- Use Ventilation provided on property
- Take outside breaks regularly
- Wear respiratory protection while exposed to emission.