Hazards | PPE Required | Additional Requirements (if any) |
|---|---|---|
Exposed Nails Tripping Unstable Rebar Hazardous fumes Sharp metal | Hard hat Gloves Safety glasses Protective footwear Hi visibility clothing | Supervisor to be trained in risk identification, assessment and control. Supervisor to be appropriately trained, qualified and competent in OH&S and electrical practices. |
Safe Work Practices
- All work to be performed by a competent worker as defined in the occupational health and safety code.
- All personnel to maintain a tidy work area at all times. PPE is to be worn at all times. Tools to be checked regularly.
- Appropriate industry and site familiarization.
- All work to be performed using General Construction Safety Rules.
Safe Job Procedure
- Check layout and mark out. Ensure areas are clear of tripping hazards.
- Install conduit boxes to timber.
- Lay conduit and accessories. Refer to SDS for any glue prodcuts used.
- Tie down conduit.